KW941

NMEA to Stepper Retransmission Interface

The KW941 interface takes serial heading data from a gyro, magnetic compass or satellite heading sensor and outputs as a traditional gyro stepper transmission    Output is standard 6 steps per degree, common positive and is selectable between 24v and 50v (25/50 version) or 35v and 70v (35/70 version). Heading input signals may be stepper 5 to 40 volt or all valid heading sentences NMEA 0183 or Furuno AD10 format serial data and clock. (DIP switch selectable).

Advantages

  • Supports wide range of compass and heading inputs
  • Selectable polarity for stepper output
  • Choice of voltage output
  • Bi-polar version available
  • Certified to IEC60945

KW941

NMEA to Stepper Retransmission Interface

 

POWER   115/230 volts 50/60 Hz. Double fused, switched and filtered.
INPUT  

STEPPER INPUT: Standard stepper 6 steps per degree. 5 to 24 volts +ve or –ve common. DATA INPUT: NMEA 0183. $HEHDT, $GPHDT and all valid heading sentences or Furuno AD10 format serial data and clock. (DIP switch selectable)

OUTPUT   Negative Step: Stepper, 6 steps per degree. 6 output ports. Option 1- nominal 24/50 volts DC (1Amp per port). Option 2- nominal 35/70 volts DC (1Amp per port). Please specify your voltage requirements when ordering. NMEA 0183 OUTPUT: $HEHDT output, following the NMEA 0183 or Furuno input only. OUTPUT: Alarm relay. 1 Amp DIL relay.
DIMENSIONS  

250 x 350 x 150mm

APPROVALS   IEC60945