Course Recorder

KW950-CR

Accepts GPS and Gyro NMEA, synchro or stepper signals. Displays gyro information and outputs ASCII data to the KW991-PRN printer.

POWER   10 to 32 volts DC at 5 watts.
INPUT  

: INPUT 1: DC and rectified unsmoothed DC stepper, 4 to 90v. 360:1 Synchro up to 115v/90v. 50/60 400/500 Hz. 90X 400 Hz contactless transmitters. Tracking rate =Frequency / 3deg/sec. (DC step 333 deg/sec) NMEA 0183 input, so both input channels are NMEA. Input 1 must be $HEHDT, x.x, T 

INPUT 2  

NMEA 0183, GPS data or GPS and heading data. These sentences provide the data required. $GPRMC or $GPGGA + $GPVTG + $GPZDA.

OUTPUT  

4800 baud. 8 bits. No parity. 1 stop bit. RS422 and RS232 compatible.

DIMENSIONS  

146 x 142 x 120mm